The Easy Cross range has now been expanded to incorporate different crafts. With the addition of this module the Easy Cross program can be used to create cross stitch and Blackwork designs which can be sent by an existing link to an embroidery machine.
When a Machine Design is created the following options will be available:
Design colours - Colours can be chosen from 17 thread chart approximations from Robison-Anton, FuFu, Janome, Madeira, DMC, Sulky and Crownminster
Satin Stitch - Satin stitch can be used so the edges of the cross stitch can be tidied up as required
Backdrop - Should the backdrop be out of alignment, it can be lined up as required.
Shapes - The shapes supplied in Easy Cross can be used in Satin stitch.
Number of Jumps - The program gives a count of the number of jumps in the design on the status bar. The jumps can be viewed as required and turned off if not wanted.
Reduce Jumps - If there too many jumps, the Reduce Jumps option will join together blocks of colour and/or remove lone stitches which will cut down the number of jump stitches.
Save As Machine Format - Save a design ready to send to the embroidery machine via your existing link, control the size of stitches and the number of strands for each stitch.
Too Large For The Hoop - Should the design be too large for the hoop, then it is possible to split it into manageable sections.
Printout - Print out a paper copy of the design that shows the design, colour changes, thread usage and information. What appears on the printout is configurable to give control.
Copyright © 1998-2004 Fulford
Software Solutions. All rights reserved.
Revised: 27 August 2006
.
